27 May 2022 ..:: Help » KitchenAid Help » KitchenAid Blender Help » KitchenAid Blender 5KSB52 Circuit Board ::.. Register   Login
 Shopping Basket Minimize
Basket is empty

 KitchenAid Blender 5KSB52 Circuit Board Minimize

KitchenAid Blender 5KSB52 Circuit Board

Tools required-Needle Nose Pliers and Phillips Screwdriver

Step 1-Unplug from the socket,remove the glass jar,collar and blade and place these to one side.

Step 2-Turn your base over and pull out the 4 rubber feet using the needle pliers and unscrew the 4 screws with the phillips screwdriver you now have 2 parts place the base to one side as we will be working on the upper housing.

Step 3-Lift off the O ring and pull the power cord out of its housing,with your hands, gently pull out both ends of the ribbon cable 1 end is located on top of the motor and the other end is located on the circuit board.

Step 4-Remove the black,red and 2 white wires that are on the circuit board and unscrew the green/yellow earth wire.

Step 5-Unscrew the circuit board by unscrewing the 2 screws located in the black holders

Step 6- The circuit board is now loose and can by repalced with your new one

Step 7- Follow these steps in reverse for replacing your new circuit board











Copyright 2009-2022 by K A Parts Limited, registered in the UK 7047084   Terms Of Use  Privacy Statement
DotNetNuke® is copyright 2002-2022 by DotNetNuke Corporation